Skyworth 26L121W – 26 inch LCD TV – Factory Mode – Disassembly - URC Set-up code list
How to enter Service mode – How to disassemble – Universal remote control set-up code list Skyworth 26 inch LCD TV – 26L121W
Factory mode adjustment
Before white balance adjustment, preheat the set for about a 2-hour.
Before white balance adjustment, a color analyzer Ca210
first set.
Channel 1 Series models in North America to use the
channel.
The whole white balance adjustment procedure is as
follows
Press menu, the main menu appears, and then followed by
the number key 1 => 9 => 9 => 9, there will be factory OSD menu, enter the factory
mode.
1. Select the
"Source" in the factory OSD menu to select a different color
temperature adjustment Source (PC / AV / S-Video / component, etc.);
2. Select Good Source, select the factory menu "Color Temp" option to adjust the color temperature corresponding Source option.
R, G, B gain adjustment
Note
1) All Source adjustment WARM, COOL, NORMAL, where PC timing of 137
(1024 * 768 60hz), AV timing of 303 (NTSC Standard), YPbPr timing of 311
(576I), HDMI timing of 350 (1080I).
2) until all the color temperature adjustment, first make PC (timing137,
pat185) and YPbPr (timing311, pat185) of the Auto Color. Remarks:
YPbPr need to take three lines, do color order YPbPr 100IRE.
3) Under normal circumstances this aircraft without adjusting W / B, only action can do Auto Color.
Disassembly illustration
Universal remote control set-up code list for Skyworth TVs
0448 0031 0699 0697 0512
0052 0244 0250 0355 0698 0406 0385 0816 0720 0460 0382 0746 0759 0798 0361 0751
0353