REPAIRING AND NOT THROWING AWAY

REPAIRING AND NOT THROWING AWAY

Richtige Fernseher haben Röhren!

Richtige Fernseher haben Röhren!

In Brief: On this site you will find pictures and technical information about Service Modes, Circuit Diagrams, Firmware Update procedure, Disassemble procedure, Universal remote control set-up codes, Troubleshooting and more....

If you go into the profession, you will obtain or have access to a variety of tech tips databases HERE IT IS Master Electronics Repair !.

These are an excellent investment where the saying: 'time-is-money' rules. However, to learn, you need to develop a general troubleshooting approach - a logical, methodical, method of narrowing down the problem. A tech tip database might suggest: 'Replace C536' for a particular symptom. This is good advice for a specific problem on one model. However, what you really want to understand is why C536 was the cause and how to pinpoint the culprit in general even if you don't have a service manual or schematic and your tech tip database doesn't have an entry for your sick TV or VCR.

While schematics are nice, you won't always have them or be able to justify the purchase for a one-of repair. Therefore, in many cases, some reverse engineering will be necessary. The time will be well spent since even if you don't see another instance of the same model in your entire lifetime, you will have learned something in the process that can be applied to other equipment problems.
As always, when you get stuck, checking out a tech-tips database may quickly identify your problem and solution.In that case, you can greatly simplify your troubleshooting or at least confirm a diagnosis before ordering parts.

Happy repairing!
Today, the West is headed for the abyss. For the ultimate fate of our disposable society is for that society itself to be disposed of. And this will happen sooner, rather than later.

How to use the site:
- If you landed here via any Search Engine, you will get what you searched for and you can search more using the search this blog feature provided by Google. You can visit more posts scrolling the left blog archive of all posts of the month/year,
or you can click on the main photo-page to start from the main page. Doing so it starts from the most recent post to the older post simple clicking on the Older Post button on the bottom of each page after reading , post after post.

You can even visit all posts, time to time, when reaching the bottom end of each page and click on the Older Post button.

- If you arrived here at the main page via bookmark you can visit all the site scrolling the left blog archive of all posts of the month/year pointing were you want , or more simple You can even visit all blog posts, from newer to older, clicking at the end of each bottom page on the Older Post button.
So you can see all the blog/site content surfing all pages in it.

- The search this blog feature provided by Google is a real search engine. If you're pointing particular things it will search IT for you; or you can place a brand name in the search query at your choice and visit all results page by page. It's useful since the content of the site is very large.

Note that if you don't find what you searched for, try it after a period of time; the site is a never ending job !

..............The bitterness of poor quality is remembered long after the sweetness of todays funny gadgets low price has faded from memory........ . . . . . .....
Don't forget the past, the end of the world is upon us! Pretty soon it will all turn to dust!

©2010, 2011, 2012, 2013, 2014 Frank Sharp - You do not have permission to copy photos and words from this blog, and any content may be never used it for auctions or commercial purposes, however feel free to post anything you see here with a courtesy link back, btw a link to the original post here , is mandatory.
All posts are presented here for informative, historical and educative purposes as applicable within fair use. NOTHING HERE IS FOR SALE !

Wednesday, 6 February 2019

SONY KDX46Q005 - TRILUMINOS - AMERICAN MARKET – 46” LCD TV – BOARD REPLACEMENT PROCEDURE AND TROUBLESHOOTING

Sony KDX46Q005 - Triluminos - American market – 46” LCD TV – Board replacement procedure and Troubleshooting

Sony Triluminos KDX-46Q005 – 46 inch LCD TV - M1MU  and DIC3 board Replacement procedure.
They have adjustment value for YLEV, CLEV and Sub-HUE. The board supplied will have center (average) value for them as the service parts. But adjustment values of analog RF input and analog CVBS input have large dispersion.  When M1MU board is changed, it should make a note of Sub RF and CVBS values and copy to new board which was replaced by service mode.  When DIC3 is changed, it also should make a note of Main RF and CVBS adjusted values and copy to new board both “DRC On” and “DRC Off”.
Other boards Replacement policy
Basically, when other boards are changed, it has no need to change any data. So you can replace without any operations.
M1MU Board Replacement
1.Making note of Sub adjusted values on TV micro service OSD
First of all, enter service mode by hitting “Display” > “5” > “VOL+” > “Power” key quickly. You can see TV micro service OSD.
As select RF input, you can get Sub RF adjustment values (YLEV, CLEV, SHUE), Make note of adjusted value.
As select Video input and hit “0” -> “Enter”, you can get Sub CVBS adjusted values as same as RF input.
M1MU Board Replacement
1.Making note of Sub adjusted values on TV micro service OSD
First of all, enter service mode by hitting “Display” > “5” > “VOL+” > “Power” key quickly. You can see TV micro service OSD.
As select RF input, you can get Sub RF adjustment values (YLEV, CLEV, SHUE), Make note of adjusted value.
As select Video input and hit “0” -> “Enter”, you can get Sub CVBS adjusted values as same as RF input.
Note 6 values as follows.
CCPS 1 20 CVYL xxx  > Sub RF input Y LEV
CCPS 1 21 CVCL xxx  > Sub RF input C LEV
CCPS 1 26 SHUE xx  > Sub RF input S HUE
CCPS 1 20 CVYL xxx  > Sub Video input Y LEV
CCPS 1 21 CVCL xxx  > Sub Video input C LEV
CCPS 1 26 SHUE xx  > Sub Video input S HUE.
2.Board Replacement
Change Broken board.
If the broken board is no power or can not show its OSD, you do not have to get the adjusted value. New board has center value, it should not go out of spec.
3.Copy adjusted values to New board
After replacing broken board, enter TV micro service mode, and write adjusted values which you noted before replacement.
Write 6 values as follows.
(1)Set RF input.
(2)Enter TV micro service mode.
(3)Change data from initial values to adjusted values which you noted.
036 ccpx ccp_cvbs.spf 002 CVYL xxx
036 ccpx ccp_cvbs.spf 000 CVCL xxx
036 ccpx ccp_cvbs.spf 004 SHUE xx
(4) Hit “Mute” > “Enter” to overwrite data (Red “WRITE” message appear).
(5) Change into Video input.
(6) Hit “0” > “Enter” to read CVBS input data.
(7) Change data from initial values to adjusted values which you noted.
036 ccpx ccp_cvbs.spf 002 CVYL xxx
036 ccpx ccp_cvbs.spf 000 CVCL xxx
036 ccpx ccp_cvbs.spf 004 SHUE xx
(8) Hit “Mute” > “Enter” to overwrite data (Red “WRITE” message appear).
DIC3 Board Replacement
1.Making note of Main adjusted values on WE micro service OSD
Go WE micro service OSD by hitting “JUMP” key from TV micro service OSD.
And you can get Main picture adjustment value as same as Sub picture.
Note 6 values as follows.
036 ccpx ccp_cvbs.spf 002 CVYL xxx  -> Main RF input Y LEV
036 ccpx ccp_cvbs.spf 000 CVCL xxx  -> Main RF input C LEV
036 ccpx ccp_cvbs.spf 004 SHUE xx  -> Main RF input S HUE
036 ccpx ccp_cvbs.spf 002 CVYL xxx  -> Main Video input Y LEV
036 ccpx ccp_cvbs.spf 000 CVCL xxx  -> Main Video input C LEV
036 ccpx ccp_cvbs.spf 004 SHUE xx  -> Main Video input S HUE
2.Board Replacement
Change Broken board.
If the broken board is no power or can not show its OSD, you do not have to get the adjusted value. New board has center value, it should not go out of spec.
3.Copy adjusted values to New board (DRC On)
After replacing broken board, set picture mode “Pro” and check Direct Mode should be
“Off”, it means DRC On (See below picture).
Enter WE micro service mode, and write adjusted values which you noted before replacement.
Write 6 values as follows.
(1)Set RF input and check DRC On.
(2)Enter TV micro service mode.
(3)Change data from initial values to adjusted values which you noted.
036 ccpx ccp_cvbs.spf 002 CVYL xxx
036 ccpx ccp_cvbs.spf 000 CVCL xxx
036 ccpx ccp_cvbs.spf 004 SHUE xx
(4) Hit “Mute” > “Enter” to overwrite data (Red “WRITE” message appear).
(5) Change into Video input and check DRC On.
(6) Hit “0” > “Enter” to read CVBS input data.
(7) Change data from initial values to adjusted values which you noted.
036 ccpx ccp_cvbs.spf 002 CVYL xxx
036 ccpx ccp_cvbs.spf 000 CVCL xxx
036 ccpx ccp_cvbs.spf 004 SHUE xx
(8)Hit “Mute” > “Enter” to overwrite data (Red “WRITE” message appear).
Copy adjusted values to New board (DRC Off)
Finally, set Direct Mode turn “On”, it means DRC Off (See below picture).
Enter WE micro service mode, and write adjusted values which you noted before replacement (As same data as the case of “DRC On”).
Write 6 values as follows.
(1)Set RF input and DRC Off.
(2)Enter TV micro service mode.
(3)Change data from initial values to adjusted values which you noted.
036 ccpx ccp_cvbs.spf 002 CVYL xxx
036 ccpx ccp_cvbs.spf 000 CVCL xxx
036 ccpx ccp_cvbs.spf 004 SHUE xx
(4)Hit “Mute” > “Enter” to overwrite data (Red “WRITE” message appear).
(5)Change into Video input and DRC Off.
(6)Hit “0” > “Enter” to read CVBS input data.
(7)Change data from initial values to adjusted values which you noted.
036 ccpx ccp_cvbs.spf 002 CVYL xxx
036 ccpx ccp_cvbs.spf 000 CVCL xxx
036 ccpx ccp_cvbs.spf 004 SHUE xx
(8)Hit “Mute” -> “Enter” to overwrite data (Red “WRITE” message appear).
Posted By: FRANK at 04:21
TAG: , ,