REPAIRING AND NOT THROWING AWAY

REPAIRING AND NOT THROWING AWAY

Richtige Fernseher haben Röhren!

Richtige Fernseher haben Röhren!

In Brief: On this site you will find pictures and technical information about Service Modes, Circuit Diagrams, Firmware Update procedure, Disassemble procedure, Universal remote control set-up codes, Troubleshooting and more....

If you go into the profession, you will obtain or have access to a variety of tech tips databases HERE IT IS Master Electronics Repair !.

These are an excellent investment where the saying: 'time-is-money' rules. However, to learn, you need to develop a general troubleshooting approach - a logical, methodical, method of narrowing down the problem. A tech tip database might suggest: 'Replace C536' for a particular symptom. This is good advice for a specific problem on one model. However, what you really want to understand is why C536 was the cause and how to pinpoint the culprit in general even if you don't have a service manual or schematic and your tech tip database doesn't have an entry for your sick TV or VCR.

While schematics are nice, you won't always have them or be able to justify the purchase for a one-of repair. Therefore, in many cases, some reverse engineering will be necessary. The time will be well spent since even if you don't see another instance of the same model in your entire lifetime, you will have learned something in the process that can be applied to other equipment problems.
As always, when you get stuck, checking out a tech-tips database may quickly identify your problem and solution.In that case, you can greatly simplify your troubleshooting or at least confirm a diagnosis before ordering parts.

Happy repairing!
Today, the West is headed for the abyss. For the ultimate fate of our disposable society is for that society itself to be disposed of. And this will happen sooner, rather than later.

How to use the site:
- If you landed here via any Search Engine, you will get what you searched for and you can search more using the search this blog feature provided by Google. You can visit more posts scrolling the left blog archive of all posts of the month/year,
or you can click on the main photo-page to start from the main page. Doing so it starts from the most recent post to the older post simple clicking on the Older Post button on the bottom of each page after reading , post after post.

You can even visit all posts, time to time, when reaching the bottom end of each page and click on the Older Post button.

- If you arrived here at the main page via bookmark you can visit all the site scrolling the left blog archive of all posts of the month/year pointing were you want , or more simple You can even visit all blog posts, from newer to older, clicking at the end of each bottom page on the Older Post button.
So you can see all the blog/site content surfing all pages in it.

- The search this blog feature provided by Google is a real search engine. If you're pointing particular things it will search IT for you; or you can place a brand name in the search query at your choice and visit all results page by page. It's useful since the content of the site is very large.

Note that if you don't find what you searched for, try it after a period of time; the site is a never ending job !

..............The bitterness of poor quality is remembered long after the sweetness of todays funny gadgets low price has faded from memory........ . . . . . .....
Don't forget the past, the end of the world is upon us! Pretty soon it will all turn to dust!

©2010, 2011, 2012, 2013, 2014 Frank Sharp - You do not have permission to copy photos and words from this blog, and any content may be never used it for auctions or commercial purposes, however feel free to post anything you see here with a courtesy link back, btw a link to the original post here , is mandatory.
All posts are presented here for informative, historical and educative purposes as applicable within fair use. NOTHING HERE IS FOR SALE !

Tuesday, 12 February 2019

SONY TVC PLASMA - PFM-500 PFM510 SERIES - FLAT PANEL MONITOR - SERVICE AND ADJUSTMENTS

SONY TVC PLASMA - PFM-500 PFM510 SERIES - FLAT PANEL MONITOR - SERVICE AND ADJUSTMENTS 

[1 OF 3]
SONY  PFM-500A3WE _ PFM-500A3WG _ PFM-500A3WU _ PFM-510A2WE _ PFM-510A2WG _ PFM-510A2WU [TVC-PLASMA]
BKM-500 > Input Adapter.
MB-514 > Mounting bracket.
RM-921 > Remote commander.
ELECTRICAL ADJUSTMENTS USING THE SERVICE MODE
The electrical adjustments can be performed using the remote commander [RM-921] supplied with  PFM-500A3W | 510A2W.  The remote commander has the service mode.  Select the Service Mode to perform the electrical adjustments.
SERVICE MENU
When enter the Service Mode, the mode menu appears as shown below.  The mode menu contains the three Menus of Main Menu, Service Menu and manual Menu.  Select the 'Service Menu' to perform the electrical adjustments.
---------------------------------------
        MODE SELECT
 MAIN MENU 
SERVICE MENU
MANUAL MENU
---------------------------------------
MAIN MENU >>  This is the user menu.  Use the Main menu when user adjustment items such as operation checks upon completion of adjustments, are going to be made.
SERVICE MENU >> This is Menu that is used for electrical adjustments.
MANUAL MENU >> This Menu is used in production Factory.  Do not make any attepts  to use this Menu, and do not make any operations using this menu.  
Service Menu Option have:
  1. EEPROM RESET  >> Initialization of EEPROM.
  2. WHITE BALANCE >> Gain adjustment of digital gamma circuit.
  3. ADC CALIBRATION >> Calibration of Analogue to Digital [A/D] converter.
  4. VIDEO PROCESSOR >> Level adjustment of video processor circuit.
  5. SPECIAL FUNCTION >> Setting the special functions.
  6. PRESET EDIT >> Editing the preset signals.
  7. MAINTENANCE >> Setting the data that are unique to the particular machine.
  8. STATUS/TEST >> Internal status and function test.
TO ENTER SERVICE MODE
  • Set the TV to "Standby" mode. [Turn the power On by its Main Power switch, and press the 'Power' button on the remote control once to make it Standby Mode]
  • Press [Display => 5 => Volume(+) => Power] buttons on the remote control.
To Exit Service Mode
  1. Turn OFF the Main Power and back ON to enter the Standby state (or)
  2. Turn OFF the Main Power to EXIT the service mode.
SERVICE MENU STRUCTURE
  • The entire area or the respective areas  of the EEPROM can be separately initialized.
Select the desired area of EEPROM to be initialized using the following menu.
-------------------------------------------------
EEPROM RESET
WHOLE AREA
COMMON
COLOR TEMP
PROG.RESET
FIXED PRESET
LAST MEMORY
USER MEMORY
FACTORY
-------------------------------------------------
To initialize the desired area, select the desired item from the EEPROM RESET menu.  Change the selected item from CANCEL to EXECUTE.  Then press 'Enter'.
  • WHOLE AREA >>> The entire area of EEPROM is initialized.  Initializing the entire area of EEPROM ha the same result as all menu items of COMMON, COLOR TEMP, PROG.PRESET, FIXED PRESET, LAST MEMORY and FACTORY are executed. 
  • COMMON >>> Only common area of the EEPROM is initialized.  When the common area is reinitialized the data that is unique to the particular machine and common data [CONFIG MENU, REMOTE MENU] are initialized.
  •  


Posted By: FRANK at 02:50
TAG: , ,