HOW TO ENTER SERVICE MODE - SONY BLU-RAY PLAYER - BDP-BX18 _S185 _ S186
Initialize to Factory Settings
BDP-S185 _
Australian / NZ Model / Chinese Model / UK Model/ Russian Model.
BDP-S185 / S186
_ AEP Model.
BDP-S185/BX18
_ Canadian Model / US Model.
SERVICE MODE
OPTION 1
The set
disconnect AC, and Push front panel key ([OPEN/CLOSE] + [PLAY] + [STOP]) and AC
IN The keys will be released if the screen in service mode is displayed on a
monitor. Control via Remote Controller.
OPTION 2
Connect the
set to AC, and wait initialization cycle complete. POWER ON SET INTO NORMAL
MODE. WHEN CROSS MEDIA BAR APPEAR.
Use Sony BDP
remote controller, key in the following SIRCS code.
[DISPLAY] => [ 0 ] => [ 2 ] => [ 1 ] => [SUBTITLE]
While
sending of SIRCS code, wait time between each key code could not send later
than 3 second.
If second
waiting is exceeded user have to re-key in the SIRCS code.
If SIRCS
enter is successful, set will auto boot up. The screen of service mode is
displayed on a monitor.
Control via
Remote Controller.
Diag
The unit
test of the device mounted on the Main Board.
Display
Error Log
Error log is
displayed. The displayed logs can be
saved in a USB memory.
Factory
Initialize
Return the
entire player setting to their factory defaults.
Network
Confirm
Wired Network connection.
Version Up
The set
updates by Update DISC.
System
Information
System
information of the set is displayed.
The Information on a soft version and drive information, etc. is
displayed.
EMC Test
Mode
Not used.
Drive
Write Drive
OP Data and check drive.
HDD Mode
Not used.
ERROR CODES
CLICK ON THE TABLE TO ZOOM IN
To initialize to factory settings
When set to
the factory defaults, push [1] on this screen.
[ENT]
Start Factory Initialize
[R E T] Ret urn to Service Top Menu.
Window 2
It is a
screen of t he end of initialization.
[R E T] Ret
urn to Service Top Menu.
Disconnect
AC power supply, and connect AC again. -
The operation of other service mode menu can be continued.