AKIRA LCT 26CHSTP SERVICE MODE LCD TV
TO ENTER SERVICE MODE
- Enter into 'Child lock' of main "Menu" in 'TV' Mode and press "OK".
- The 'Password' input box will appear.
- Press the following keys from the remote control in sequence to enter the Service Mode.
- [7 => Red key => 9 => Blue key]
- Factory Menu will appear.
- After entering into Factory Mode Menu; sigh of the Factory Menu 'M' will appear on the screen.
Service Menu [Factory menu] setup.
- 'M'
- Index: 1
- HWUC_BRI 0x1F
"M" denotes entering into Factory Mode now.
The figure of Index denotes the index number now.
The HWUC_BRI 0x1F denotes the name of adjusting item now.
The 0x1F denotes the numerical value.
- Each adjusting item have only one index number, the operator press the numeric key or press [P+ / P-] directly.
Optional and adjustable items, the corresponding relations of index number and adjusting items
INDEX => NAME => DEFINITION => OPERATING KEY => REMARK
- => hwuc_bri => UOCIII subsidiary brightness => V+ / V- => Tune Sub Brightness
- => hwuc_sat => UOCIII saturation => V+/V- => Tune sub saturation
- => hwuc_con => UOCIII contrast => V+/V- => Tune sub contrast
- => hwuc_agc => UOCIII AGC => V+/V- => Tune AGC.
- => PIP brightness => 7115 sub bright => V+/V- => Open sub picture when tuning it.
- => PIP VGA contrast => 7115 contrast => V+/V- => Open sub picture when tuning it.
- => Balance => sound balance => V+/V- => The tuning value is 50,-50, 0.
- => Volume => Sound volume => V+/V- => STEP IS 10.
- => Sound system => Sound system => V+/V- => DK/I/BG/M
- => Auto search => Auto searching => V+/OK =>Source of signal is TV.
- => White balance => White balance => V+/Ok
- => Auto color => Auto color revise => V+/Ok => Source of signal VGA/YpbPr/Tv
- => DVD => DVD preset => V+/V- => 1 represent preset.
- => BBE => BBE preset => V+/V- => 1 represent preset.
- => TruSurround => TruSurround preset => V+/V- => 1 represent preset.
- => Salesfor => Salesfor => V+/V- => Sell sell country.
- => Factory out => Initiliazation => V+/Ok => Leave factory set.
- => ClearEEPROM => Initialize EEProm => V+/Ok => Initialize the storage data.
- => D Mode => Enter into design mode => V+/Ok => Adjustable design mode all parameter.
- => DPF => DPF preset => V+/V- => 1 represent preset.
- => BBE cont => BBE plus set => V+/V- => Tune BBE plus.
- => BBE_Proc => BBE plus set => V+/V- => Tune BBE plus.
- => Newcom => Newcom set => V+/V- => 1 represent preset.
- If no special demand, do not enter into 20th item (Design Mode).
- When tuning the 16th item, the storage data will be cleaned off. Therefore if not necessary, do not adjust it. The items of index numbers 1,2,3,4,5&6 are not necessary to adjust.
METHODS OF ADJUSTMENTS FOR FACTORY MENU
- Select the adjusting item operator can skip the adjusting items by pressing the number key. Also can select the adjusting item in the order of P+/P- when pressing the number key. If the adjusting item is 1 to 9, input the corresponding number keys and press down OK. If the adjusting items ten digits, input tens digit for example, press number key '8' when adjusting the volume, can see the color which become Green, the press down OK. The color of the index number turns Red, so you already selected corresponding volume adjusting item.
- Adjust the items according to operating key in above list. For one acting operation. Press Ok/V+ example, auto color. For some variable Add/Reduce, example Vol+/Vol-. All menu functions are on Factory Mode, if necessary can use menu to check the items and effect test.
