REPAIRING AND NOT THROWING AWAY

REPAIRING AND NOT THROWING AWAY

Richtige Fernseher haben Röhren!

Richtige Fernseher haben Röhren!

In Brief: On this site you will find pictures and technical information about Service Modes, Circuit Diagrams, Firmware Update procedure, Disassemble procedure, Universal remote control set-up codes, Troubleshooting and more....

If you go into the profession, you will obtain or have access to a variety of tech tips databases HERE IT IS Master Electronics Repair !.

These are an excellent investment where the saying: 'time-is-money' rules. However, to learn, you need to develop a general troubleshooting approach - a logical, methodical, method of narrowing down the problem. A tech tip database might suggest: 'Replace C536' for a particular symptom. This is good advice for a specific problem on one model. However, what you really want to understand is why C536 was the cause and how to pinpoint the culprit in general even if you don't have a service manual or schematic and your tech tip database doesn't have an entry for your sick TV or VCR.

While schematics are nice, you won't always have them or be able to justify the purchase for a one-of repair. Therefore, in many cases, some reverse engineering will be necessary. The time will be well spent since even if you don't see another instance of the same model in your entire lifetime, you will have learned something in the process that can be applied to other equipment problems.
As always, when you get stuck, checking out a tech-tips database may quickly identify your problem and solution.In that case, you can greatly simplify your troubleshooting or at least confirm a diagnosis before ordering parts.

Happy repairing!
Today, the West is headed for the abyss. For the ultimate fate of our disposable society is for that society itself to be disposed of. And this will happen sooner, rather than later.

How to use the site:
- If you landed here via any Search Engine, you will get what you searched for and you can search more using the search this blog feature provided by Google. You can visit more posts scrolling the left blog archive of all posts of the month/year,
or you can click on the main photo-page to start from the main page. Doing so it starts from the most recent post to the older post simple clicking on the Older Post button on the bottom of each page after reading , post after post.

You can even visit all posts, time to time, when reaching the bottom end of each page and click on the Older Post button.

- If you arrived here at the main page via bookmark you can visit all the site scrolling the left blog archive of all posts of the month/year pointing were you want , or more simple You can even visit all blog posts, from newer to older, clicking at the end of each bottom page on the Older Post button.
So you can see all the blog/site content surfing all pages in it.

- The search this blog feature provided by Google is a real search engine. If you're pointing particular things it will search IT for you; or you can place a brand name in the search query at your choice and visit all results page by page. It's useful since the content of the site is very large.

Note that if you don't find what you searched for, try it after a period of time; the site is a never ending job !

..............The bitterness of poor quality is remembered long after the sweetness of todays funny gadgets low price has faded from memory........ . . . . . .....
Don't forget the past, the end of the world is upon us! Pretty soon it will all turn to dust!

©2010, 2011, 2012, 2013, 2014 Frank Sharp - You do not have permission to copy photos and words from this blog, and any content may be never used it for auctions or commercial purposes, however feel free to post anything you see here with a courtesy link back, btw a link to the original post here , is mandatory.
All posts are presented here for informative, historical and educative purposes as applicable within fair use. NOTHING HERE IS FOR SALE !

Friday, 8 February 2019

RCA TVS _ GENERAL PROBLEMS AND SOLUTIONS _ TV WORKING BUT NO COLOR_ CAN'T SELECT CERTAIN CHANNELS

RCA TVs _ GENERAL PROBLEMS AND SOLUTIONS _ TV WORKING BUT NO COLOR_ CAN'T SELECT CERTAIN CHANNELS


TV WORKS, SOUND OK, PICTURE OK, BUT NO COLOR

There are a couple of things you can check in terms of color to picture:
Be sure the program is being broadcast in color.  Try changing channel to see if the color is correct on other channels.

  • Try adjusting the antenna.  A weak signal can cause noise and loss of color in picture.
  • Try adjusting the picture quality settings.



  • Press Menu on the remote control.
  • Press the Arrow buttons to select the Picture Quality menu.
  • Select Picture Controls.  Here you can adjust the brightness, color, contrast, tint and sharpness of the picture.
  • Adjusting the picture quality on some RCA TVs is done slightly differently.  
  • Press Menu button and then use Ch+/- buttons to select the video menu.  Use the Vol +/- buttons to change the individual settings; 

 OR 

  • Press Menu repeatedly to select the Adjacent menu.   Then press 'Channel' to highlight the picture item you want to adjust using Vol +/- to adjust each item.  
  • Press 'Display' of 'Clear' to remove the menu.  Depending on your TV model, pressing 'Cancel' or 'Reset' on the menu while making picture adjustments, will return all adjustments to factory preset levels. 


CAN'T SELECT CERTAIN CHANNELS

There are a number of things that could be causing this problem: Parental Controls: The channel may be blocked or is not approved in the Parental Controls menu, if you have this feature. Accessing the Parental Controls menu depends upon the TV model.

 OPTION -A

  1. Press menu to display the main menu.
  2. Select parental controls menu.

OPTION-B

  1. Press menu on the remote control to display the main menu.
  2. Select TV Setup.
  3. Select V-Chip set.


 TV/VCR mode:  If  you're using a VCR, the TV/VCR button could be in the wrong mode. Press the TV/VCR button on the VCR to correct this. Cable/Air Setting: The Cable/Air function could be in the wrong position. Depending on your model, there are different ways to correct this.

 OPTION -A
Press Menu button on the remote control, select the channel menu, then select the appropriate signal type:
OPTION-B
Select Guide Plus+TM menu from the main menu, then select 'Setup'option and provide the correct information on the following screens.
OPTION - C

  1. Check the reception; Cable/Air setting in the TV setup menu.
  2. Auto channel search.

If the channels can be accessed using the number buttons on the remote control, but not Ch+/- buttons, it may not be programmed in the Auto Channel Search function   Accessing this varies depending on model.

  1. Press Menu button on the remote.
  2. Select 'Channel' menu.
  3. Select 'Auto Channel Search'.
  4. Conduct a new search or manually add channels
Posted By: FRANK at 06:55
TAG: ,