REPAIRING AND NOT THROWING AWAY

REPAIRING AND NOT THROWING AWAY

Richtige Fernseher haben Röhren!

Richtige Fernseher haben Röhren!

In Brief: On this site you will find pictures and technical information about Service Modes, Circuit Diagrams, Firmware Update procedure, Disassemble procedure, Universal remote control set-up codes, Troubleshooting and more....

If you go into the profession, you will obtain or have access to a variety of tech tips databases HERE IT IS Master Electronics Repair !.

These are an excellent investment where the saying: 'time-is-money' rules. However, to learn, you need to develop a general troubleshooting approach - a logical, methodical, method of narrowing down the problem. A tech tip database might suggest: 'Replace C536' for a particular symptom. This is good advice for a specific problem on one model. However, what you really want to understand is why C536 was the cause and how to pinpoint the culprit in general even if you don't have a service manual or schematic and your tech tip database doesn't have an entry for your sick TV or VCR.

While schematics are nice, you won't always have them or be able to justify the purchase for a one-of repair. Therefore, in many cases, some reverse engineering will be necessary. The time will be well spent since even if you don't see another instance of the same model in your entire lifetime, you will have learned something in the process that can be applied to other equipment problems.
As always, when you get stuck, checking out a tech-tips database may quickly identify your problem and solution.In that case, you can greatly simplify your troubleshooting or at least confirm a diagnosis before ordering parts.

Happy repairing!
Today, the West is headed for the abyss. For the ultimate fate of our disposable society is for that society itself to be disposed of. And this will happen sooner, rather than later.

How to use the site:
- If you landed here via any Search Engine, you will get what you searched for and you can search more using the search this blog feature provided by Google. You can visit more posts scrolling the left blog archive of all posts of the month/year,
or you can click on the main photo-page to start from the main page. Doing so it starts from the most recent post to the older post simple clicking on the Older Post button on the bottom of each page after reading , post after post.

You can even visit all posts, time to time, when reaching the bottom end of each page and click on the Older Post button.

- If you arrived here at the main page via bookmark you can visit all the site scrolling the left blog archive of all posts of the month/year pointing were you want , or more simple You can even visit all blog posts, from newer to older, clicking at the end of each bottom page on the Older Post button.
So you can see all the blog/site content surfing all pages in it.

- The search this blog feature provided by Google is a real search engine. If you're pointing particular things it will search IT for you; or you can place a brand name in the search query at your choice and visit all results page by page. It's useful since the content of the site is very large.

Note that if you don't find what you searched for, try it after a period of time; the site is a never ending job !

..............The bitterness of poor quality is remembered long after the sweetness of todays funny gadgets low price has faded from memory........ . . . . . .....
Don't forget the past, the end of the world is upon us! Pretty soon it will all turn to dust!

©2010, 2011, 2012, 2013, 2014 Frank Sharp - You do not have permission to copy photos and words from this blog, and any content may be never used it for auctions or commercial purposes, however feel free to post anything you see here with a courtesy link back, btw a link to the original post here , is mandatory.
All posts are presented here for informative, historical and educative purposes as applicable within fair use. NOTHING HERE IS FOR SALE !

Thursday 21 February 2019

SANYO HD PRO SERIES- PLV-55 WHD1 PLV-65 WHD1 SERVICE MODE LAMP REPLACEMENT LCD PROJECTION TV.

SANYO HD PRO SERIES- PLV-55 WHD1 PLV-65 WHD1 SERVICE MODE LAMP REPLACEMENT LCD Projection TV.


TO ENTER SERVICE MODE

  • Press & Hold the "INFO" button on the remote control, then press [Vol (-)] button on the control panel of the TV at its side.  
  • Service mode will be displayed.
ADJUSTMENTS

Adjust the service data using the following control buttons.
  • Channel (Up) => An item number increases.
  • Channel (Dn) => An item number decreases.
  • Point Right or Volume (+) => An adjustment data value increases.
  • Point Left or Volume (-) => And adjustment data value decreases.
To 'Exit" service mode, press the Power ON/OFF button only once on the TV or the remote control.

LAMP REPLACEMENT

When the life of lamp draws to an end, the "Lamp Replace" indicator will become yellow.  If this indicator turns to yellow, replace the lamp with new one.
  1. Turn OFF the TV and disconnect AC plug.  Allow TV to cool for at least 30 minutes.
  2. Press the latches on the both sides of the front cover and pull the front cover forward to remove.
  3. Loosen screw that secure the Lamp Cover with a screwdriver and remove the Lamp Cover.
  4. Loosen the two screws that secure lamp with a screwdriver and pull out the Lamp by holding the holes on both side.
  5. Replace the Lamp with new one and put it back and tighten the two fixing screws.  Make sure that the Lamp is correctly secured into the Lamp Compartment.
  6. Put the Lamp Cover back and tighten the screw, and then replace the front cover.  
  7. Connect AC power cord to the power cord connector and turn on the TV.
  8. Reset the Lamp Replace Counter.  
LAMP REPLACE COUNTER RESET.

REPLACEMENT LAMP TYPE AND NUMBER:  POA-LMP96.  Service Part number (610 322 7382)  TV set Models [PLV-55WHD1 _ PLV-65WHD1]
  • Press "Menu" key to display Main Menu.
  • Use the cursor [Up] or [Dn] keys to highlight (Green) Lamp Counter Reset and press "Enter".
  • User cursor [Dn] key to select (yes), and press "Enter".
  • Press 'Exit" to return to normal viewing. 
NB:  Do not replace Lamp Reset Counter without implementation of lamp replacement.  Be sure to reset the Lamp replacement counter, only after replacing the Lamp.  The lamp counter cannot be reset even if you press the 'reset' key on the remote control.

TO CHECK LAMP USED TIME
  1. Press & Hold the "INFO" button on the remote control, and press (CH +) button on the side control of the TV.
  2. The LCD projection TV used time, and Lamp used time will be displayed on the screen briefly.
  • The Lamp Replace Indicator will light Yellow when the total lamp used time reaches[7980 Hours].  This is to indicate the lamp replacement is required.  The total lamp use time is calculated by using the below expression 
  • Lamp Used Time = Tceo + Tnormal * 1.14. (where Tceo > used time in Lamp mode "low"; Tnormal > used time in Lamp mode "high & Mid".
Posted By: FRANK at 04:15
TAG: , ,