ERROR CODES [LED BLINKS]
OVP: Over Voltage Protection
UVP: Under Voltage Protection
Protection Circuits
42” SD v5, 42” HD w1, 50” HD w1 Voltage Outputs
NO POWER
Check or change: *F8001(250V/8A)
OPEN ** R8012,
R8013 OPEN ***D8006
SHORT
PS-424 - PHILIPS POWER SUPPLY [SMPS] TROUBLESHOOTING - NO 5V2 - RELAY ON_OFF
NO 5.2V
Check or change: F8001(250V/8A) OPEN.
Check or change: IC8003, Q8008, D8018, ZD8225, D8016, ZD8100 , D8017, ZD8200
Check or change: Copper side: Q8002, ZD8205, ZD8102
RELAY ON & OFF
Check or change:
U8003 DEAD.
Check or change: IC8012 DEAD.
Check or change: HIC8001 ALARM BOARD.
Check or change: IC8011 DEAD.