DIGITAL LED
Model: DLE-1922
Chassis / Version: MST6M48V3.0-B
Panel: HE185WX1-100
PWM LED driver: SAQ881
MainBoard: MST6M48V3.0-B
IC MainBoard: NT5TU32M16DG-AC, MX25L3206E, SA7454,
Tuner: AFT7 / W110G
Technical Specifications DLE-1922
DIGITAL DLE-1922
General repair guidelines for TV LCD LED
Possible malfunctions
- The DIGITAL DLE-1922 TV does not turn on. There are no signs of operability. The indicators on the front panel do not shine and do not blink, and the remote control and control buttons do not respond.
In such cases, the power supply is usually faulty. It is necessary to measure the secondary output voltages, and in case of their absence, check the serviceability of the power switches of the converters and rectifier diodes for a short circuit.
In case of breakdowns in the secondary circuits, the converter can operate in a short circuit mode, and during short circuit in the power elements of the primary circuit, the mains fuse usually breaks.
Mos-Fet keys used in switching power supplies usually fail due to a malfunction of other elements that can put it out of operation in key mode or provoke the excess of maximum current or voltage values. It can be supply, damper circuits, or elements of OOS (negative feedback) stabilization. The reason for the breakdown of the power switch may be PWM (PWM). It is checked only by replacement with a known good one.
- There is no image, but there is sound and reaction to the remote control. Or for a second, the image may appear immediately after switching on.
As a rule, in such cases there is no display backlight. The reason for this may be a break in the LED circuit, or a problem in stabilizing their power supply.
To check the LED lines for breaks without disassembling the panel, for example, a current source will help. It is impossible to open series-connected PN junctions with a simple multimeter, a voltage of the order of several tens of volts is required.
- The indicator blinks or lights constantly, the TV does not turn on, does not respond to the remote control.
Repair or diagnostics of the MST6M48V3.0-B motherboard should begin by checking the stabilizers and power converters needed to power the chips and matrix. If necessary, update or replace the software (software). Sophisticated MB board repair (SSB) is in some cases possible and practiced by repairmen. To do this, check and, if necessary, replace the elements NT5TU32M16DG-AC, MX25L3206E, SA7454,. BGA chip malfunctions are usually easy to detect by warming up.
AFT7 / W110G tuner malfunction is established after checking the software and all supply voltages at its terminals. The data exchange of the tuner with the processor via the I2C bus can be controlled by an oscilloscope.
Attention! For users and owners of DLE-1922 TVs who do not have the appropriate qualifications, knowledge and experience, we categorically do not recommend attempting self-repair in order to avoid negative consequences that could lead to complete non-repairability of the device.
Backlight Edge LED, Diagonal of 19 inches (48 cm), Screen format 16: 9, Resolution 1366x768, Support HD 720p, Brightness 600 cd / m2, Dynamic contrast ratio 15000: 1, Viewing angle 170 °, Pixel response time 4 ms
Repair MainBoard
The appearance of the MainBoard JPE-MST718 is shown in the figure below:
JPE-MST718
JPE-MST718 can be used in TVs:
DIGITAL DL-15J82 (Panel M150XN07), DIGITAL DL-20J80 (Panel SVA201VG01TB), DIGITAL DL-20J85 (Panel M201EW02), DIGITAL DL-26J82 (Panel T260XW02), DIGITAL DL-32J82 (Panel T315XW02).
Main features of the DIGITAL DLE-1922 device:
Installed matrix (LED panel) HE185WX1-100.
A converter controlled by the SAQ881 PWM controller is used to power the backlight LEDs.
The required supply voltage for all nodes of the DIGITAL DLE-1922 TV is provided by a switching power supply.
MainBoard - the main board (motherboard) is an MST6M48V3.0-B module, using chips NT5TU32M16DG-AC, MX25L3206E, SA7454, and others.
The AFT7 / W110G tuner provides TV reception and channel tuning.
Additional technical information about the panel:
Brand: BOE
Model: HE185WX1-100
Type: a-Si TFT-LCD, CELL
Diagonal size: 18.5 inch
Resolution: 1366x768, WXGA
Display Mode: TN, Normally White, Transmissive
Active Area: 409.8x230.4 mm
Surface: Antiglare (Haze 25%), Hard coating (3H)
Transmissivity: 6.0% (with Polarizer)
Contrast Ratio: 1000: 1
Display Colors: 16.7M (6-bit + Hi-FRC)
Response Time: 1.5 / 3.5 (Tr / Td)
Frequency: 60Hz
Signal Interface: LVDS (1 ch, 8-bit), 30 pins
Voltage: 5.0V