REPAIRING AND NOT THROWING AWAY

Richtige Fernseher haben Röhren!

Richtige Fernseher haben Röhren!

In Brief: On this site you will find pictures and technical information about Service Modes, Circuit Diagrams, Firmware Update procedure, Disassemble procedure, Universal remote control set-up codes, Troubleshooting and more....

If you go into the profession, you will obtain or have access to a variety of tech tips databases HERE IT IS Master Electronics Repair !.

These are an excellent investment where the saying: 'time-is-money' rules. However, to learn, you need to develop a general troubleshooting approach - a logical, methodical, method of narrowing down the problem. A tech tip database might suggest: 'Replace C536' for a particular symptom. This is good advice for a specific problem on one model. However, what you really want to understand is why C536 was the cause and how to pinpoint the culprit in general even if you don't have a service manual or schematic and your tech tip database doesn't have an entry for your sick TV or VCR.

While schematics are nice, you won't always have them or be able to justify the purchase for a one-of repair. Therefore, in many cases, some reverse engineering will be necessary. The time will be well spent since even if you don't see another instance of the same model in your entire lifetime, you will have learned something in the process that can be applied to other equipment problems.
As always, when you get stuck, checking out a tech-tips database may quickly identify your problem and solution.In that case, you can greatly simplify your troubleshooting or at least confirm a diagnosis before ordering parts.

Happy repairing!
Today, the West is headed for the abyss. For the ultimate fate of our disposable society is for that society itself to be disposed of. And this will happen sooner, rather than later.

How to use the site:

- If you landed here via any Search Engine, you will get what you searched for and you can search more using the search this blog feature provided by Google. You can visit more posts scrolling the left blog archive of all posts of the month/year,
or you can click on the main photo-page to start from the main page. Doing so it starts from the most recent post to the older post simple clicking on the Older Post button on the bottom of each page after reading , post after post.

You can even visit all posts, time to time, when reaching the bottom end of each page and click on the Older Post button.

- If you arrived here at the main page via bookmark you can visit all the site scrolling the left blog archive of all posts of the month/year pointing were you want , or more simple You can even visit all blog posts, from newer to older, clicking at the end of each bottom page on the Older Post button.
So you can see all the blog/site content surfing all pages in it.

- The search this blog feature provided by Google is a real search engine. If you're pointing particular things it will search IT for you; or you can place a brand name in the search query at your choice and visit all results page by page. It's useful since the content of the site is very large.

Note that if you don't find what you searched for, try it after a period of time; the site is a never ending job !

..............The bitterness of poor quality is remembered long after the sweetness of todays funny gadgets low price has faded from memory........ . . . . . .....
Don't forget the past, the end of the world is upon us! Pretty soon it will all turn to dust!

©2010, 2011, 2012, 2013, 2014 Frank Sharp - You do not have permission to copy photos and words from this blog, and any content may be never used it for auctions or commercial purposes, however feel free to post anything you see here with a courtesy link back, btw a link to the original post here , is mandatory.
All posts are presented here for informative, historical and educative purposes as applicable within fair use. NOTHING HERE IS FOR SALE !

Friday, 8 February 2019

HP ENVY 8 NOTE 5000 TABLET – DISASSEMBLING PROCEDURE

HP ENVY 8 Note 5000 Tablet – Disassembling procedure


HP ENVY 8 Note 5000 Tablet – Disassembling procedure – How to remove the back cover – how to remove the battery – How to remove the frame
How to remove White back cover
Before removing the white back cover, follow these steps:
1. Turn off the tablet. If you are unsure whether the tablet is off, turn the tablet on, and then shut it down through the operating system.
2. Disconnect the power from the tablet by unplugging the power adapter cord from the tablet.
3. Disconnect all external devices from the tablet.
Remove the white back cover:
1. Place the tablet on a flat surface, display panel side down.
2. Insert a thin tool (2) at the bottom right edge of the white cover, and use the tool to release the cover from the clips and adhesive holding it to the tablet.
3. Lift the cover (3) away from the tablet.
How to remove Black back cover
Before removing the black back cover, follow these steps:
1. Turn off the tablet. If you are unsure whether the tablet is off turn the tablet on, and then shut it down through the operating system.
2. Disconnect the power from the tablet by unplugging the power adapter cord from the tablet.
3. Disconnect all external devices from the tablet.
4. Remove the white back cover
Remove the black back cover:
1. Place the tablet on a flat surface, display panel side down
2. Using a heat gun, gently heat a small portion the black back cover to loosen the adhesive. Keep the heat away from the camera.
3. Insert a thin tool (1) at the inside edge of the black cover.
4. Lift the cover (2) and peel to remove.
How to remove Middle frame
Before removing the middle frame, follow these steps
1. Turn off the tablet. If you are unsure whether the tablet is off  turn the tablet on, and then shut it down through the operating system.
2. Disconnect the power from the tablet by unplugging the power adapter cord from the tablet.
3. Disconnect all external devices from the tablet.
4. Remove the following components:
a. Micro SIM/microSD card tray
b. White back cover
c. Black back cover
Remove the middle frame:
1. Place the tablet on a flat surface, display panel side down.
2. Remove the 4 larger 4 mm P0 Phillips head screws from the middle frame.
3. Remove the remaining fourteen 2 mm P0 Phillips head screws that secure the middle frame to the tablet.
4. Insert a thin tool (1) where the display is connected to the frame, and then slide the tool around the frame to separate the frame from the display.
5. Remove the frame (2).
How to remove Side key buttons
Before removing the side key buttons, follow these steps:
1. Turn off the tablet. If you are unsure whether the tablet is off turn the tablet on, and then shut it down through the operating system.
2. Disconnect the power from the tablet by unplugging the power adapter cord from the tablet.
3. Disconnect all external devices from the tablet.
4. Remove the following components:
a. Micro SIM/microSD card tray
b. White back cover
c. Black back cover
d. Middle frame
Remove the side key buttons:
1. Place the tablet on a flat surface, display panel side down.
2. Push in on the side key buttons, and then remove the button tray up away from the tablet.
How to remove Battery
Before removing the battery, follow these steps:
1. Turn off  the tablet. If you are unsure whether the tablet is off turn the tablet on, and then shut it down through the operating system.
2. Disconnect the power from the tablet by unplugging the power adapter cord from the tablet.
3. Disconnect all external devices from the tablet.
4. Remove the following components:
a. Micro SIM/microSD card tray
b. White back cover
c. Black back cover
d. Middle frame
Remove the battery:
1. Lift the black plastic thermal pad (1) up and away from the battery.
2. Disconnect the battery cable (2) from the system board.
3. Grasp the pull-tab on one of the 3 strips of tape and then carefully and slowly pull straight away, parallel with the tablet, until the entire strip has been removed. After releasing the 3 stretch-release tapes, carefully remove the battery (3) from the tablet.