Technical description and composition of the SAMSUNG UE40H5003AK TV, panel type and applicable modules. The composition of the modules.SAMSUNG LED
Model: UE40H5003AK UE40H5003
Chassis / Version: IS01
Panel: CY-HH040BGNV1V / V400HJ6-PE1 Rev. C7
LED driver (backlight): integrated into PSU; 148V 350mA
MOSFET LED driver: MDD5N40
Power Supply (PSU): BN44-00754A L40G0B_ESM PSLF870G06A
PWM Power: S3330 (FAN6755)
MainBoard: BN41-02217B BN94-07155S
IC MainBoard: SENK14, 25Q40CLSIP, S24C256C, K4B2G164GQ-BCKO
Tuner: BN40-00287A DNTQ403IL286A
Technical Specifications UE40H5003
SAMSUNG UE40H5003AK
General repair guidelines for TV LCD LED
Possible manifestations of defects
- SAMSUNG UE40H5003AK does not turn on. There are no signs of operability. The indicators on the front panel do not light or flash, the TV does not respond to the remote control and control buttons.
With such manifestations, a malfunction can sometimes be detected in the BN44-00754A power supply module. It is necessary to measure its output voltages and, if they are absent, to check the short circuit probability in the converters power switches and rectifier diodes.
In case of breakdowns in the secondary circuits, the converter can emergencyly operate in the short circuit mode, and during short circuit in the power elements of the primary circuit, the mains fuse usually breaks.
The breakdown of Mos-Fet keys used in pulsed sources is often caused by malfunctions of other elements, for example, elements supplying a PWM controller, frequency-setting, damper, and also elements of the Negative Stabilization Feedback. PWM S3330 (FAN6755) is usually checked by replacement.
- There is no image, there is sound, it responds to the remote control. Or the image may appear for a second when turned on and immediately disappears.
In most cases, a malfunction is caused by a lack of display backlight. The reason can be both in the power supply of the LEDs, in their serviceability (breakdown or breakage), as well as in the violation of the contact connections of the LED strips.
When trying to identify a break in the LED lines, it should be borne in mind that it is difficult to do this without disassembling the panel. For example, a current source is needed to open PN junctions connected in series.
- The TV does not enter the operating mode, does not respond to the remote control. The indicator on the front panel lights up constantly or blinks.
Repair or diagnostics of the BN41-02217B motherboard should begin by checking the stabilizers and power converters needed to power the chips and matrix. If necessary, you should update or replace the software (software). Sometimes it is necessary to check or replace (if necessary) the elements of the MainBoard board - SENK14, 25Q40CLSIP, S24C256C, K4B2G164GQ-BCKO. In cases where the BGA processor is used, its malfunction is usually detected by the local heating method.
Before replacing the tuner BN40-00287A DNTQ403IL286A, if there is no tuning for the channels, you must first check the software and the supply voltage at its terminals. It is also necessary to make sure that the tuner and processor can exchange data via the I2C bus
TV users and owners need to remember that attempts to self-repair a SAMSUNG UE40H5003AK TV without the appropriate qualifications and the necessary experience can lead to serious negative consequences!
Appearance of MainBoard and voltage measurements at test points BN41-02217B:BN41-02217B
BN41-02217B can be used in TVs:
SAMSUNG UE40H4200AK (Panel CY-HH040AGLV1V), SAMSUNG UE40H5300AK (Panel CY-HH040BGNV1V), SAMSUNG UE48H4200AK (Panel CY-HH048AGLV1V) SAMSUNG UE40H5003AK UE40HHV1-PEVH401BEVB1BEV1 (PE)
The appearance of the power supply
Main features of the SAMSUNG UE40H5003AK device:
Installed matrix (LED panel) CY-HH040BGNV1V / V400HJ6-PE1 Rev. C7
To power the backlight LEDs, a converter is used, combined with a power supply. As power elements of the LED driver, keys of the MDD5N40 type are used.
The necessary supply voltages for all nodes of the SAMSUNG UE40H5003AK TV are generated by the BN44-00754A power module, or its analogs using S3330 chips (FAN6755).
MainBoard - the main board (motherboard) is a BN41-02217B module, using microchips SENK14, 25Q40CLSIP, S24C256C, K4B2G164GQ-BCKO and others.
The tuner BN40-00287A DNTQ403IL286A provides the reception of television programs and tuning to channels.
