
SAMSUNG LED
Model: UE40JU6600U
Panel: CY-WJ040HGLV4V
LED backlight: LM41-00117C, LM41-00117B
T-CON: BN41-02297 LSF400FN02-K
LED driver (backlight): integrated into PSU
Power Supply (PSU): BN44-00806A L40S6_FDY
MOSFET Power: K8A50D
MainBoard: BN41-02344D
IC MainBoard: CPU: SDP1406, Spi Flash: 25Q40CLSIP, SOUND: NTP7415, dram: K4B2G1646Q-BCMA
Tuner: BN40-00318B
Technical Specifications UE40JU6600U
SAMSUNG UE40JU6600U
General repair guidelines for TV LCD LED
Possible malfunctions
- SAMSUNG UE40JU6600U does not turn on, the indicators on the front panel do not light or flash. The TV does not respond to the control buttons and the remote control.
With similar manifestations, in some cases, the BN44-00806A power module is faulty. It is necessary to verify the presence of its output voltages and, if they are completely absent, check the power switches (K8A50D) and rectifier diodes for a probable short circuit.
In case of breakdowns of diodes in the secondary circuits, the converter can operate in emergency short circuit mode without output voltages, and during short circuit in the power elements of the primary circuit, the mains fuse and / or current sensor at the source of the key usually breaks.
The breakdown of power switches (MosFet) in pulsed sources is sometimes caused by malfunctions of other circuit elements, for example, in circuits supplying a PWM controller, frequency-setting or damper ones, as well as in negative feedback (OOS) stabilization circuits. PWM controllers (PWM), if they do not have visible damage to the chassis and open short circuit between the terminals, are usually checked by replacement.
- There is no image, but there is sound and reaction to commands from the remote control. Or the image appears immediately after turning on and disappears.
In some of these cases, a malfunction is caused by a lack of display backlight. The reason can be both in the power supply of the LEDs, in their serviceability (breakdown or breakage), as well as in the violation of the contact connections of the LED strips.
To check the LED lines for breaks without disassembling the panel, for example, a current source will help. It is impossible to open series-connected PN-junctions with a simple multimeter, a voltage of the order of several tens of volts is required.
- The TV does not turn on, the indicator signals standby or working mode, or blinks.
Repair or diagnostics of the BN41-02344D motherboard should begin by checking the stabilizers and power converters needed to power the chips and matrix. If necessary, update or replace the software (software). Complex repair of MB (SSB) is possible only in the conditions of a service center with the necessary equipment. Checking or replacing Spi Flash elements: 25Q40CLSIP, SOUND: NTP7415 requires the necessary training and professional skills to repair modules at the component level. Problems associated with the use of BGA soldering technologies can sometimes be diagnosed by warming up.
TV users and owners need to remember that attempts to self-repair a SAMSUNG UE40JU6600U TV without the appropriate qualifications and necessary experience can lead to serious negative consequences!

BN41-02344D
The appearance of the power supply
Main features of the SAMSUNG UE40JU6600U device:
Installed matrix (LED-panel) CY-WJ040HGLV4V.
The matrix control uses the Timing Controller (T-CON) BN41-02297.
To power the backlight LEDs, a converter is used, combined with a power supply.
The formation of the necessary supply voltages for all nodes of the SAMSUNG UE40JU6600U television is carried out by the BN44-00806A power module, or its analogs using power switches of the K8A50D type.
MainBoard - the main board (motherboard) is a BN41-02344D module, using CPU chips: SDP1406, Spi Flash: 25Q40CLSIP, SOUND: NTP7415, dram: K4B2G1646Q-BCMA and others.
The tuner BN40-00318B provides the reception of television programs and tuning to channels.