 LOEWE Xelos L 2650  P 2650  SERVICE MODE  Option Byte Table.
LOEWE Xelos L 2650  P 2650  SERVICE MODE  Option Byte Table.
TO ENTER SERVICE MODE
 
- Press 'Function button M' on the remote control once.
- Press 'Right Arrow' button (inner ring) of the remote control repeatedly "until indication (Service) will be marked and within a second, press "Menu" button on the remote control. {Locate all the above said buttons on the remote control, prior to enter the service mode procedure and fast action is necessary.}
OPTION BYTE TABLE.
| 
Alignment function. | 
Bit No | 
Meaning  | 
“0” | 
“1” | 
Adjusted in the Factory | 
| 
Byte 0 | 
1 | 
EPG program filter. | 
On  | 
Off  | 
0 | 
| 
5 | 
Blue picture without signal. | 
Yes  | 
No  | 
0 | |
| 
Byte 1 | 
1 | 
Effect light for background. | 
Off    | 
On  | 
0 | 
| 
2 | 
WSS detection in VCR mode | 
No | 
Yes  | 
1 | |
| 
3 | 
AMD [Atom. Movie detection] | 
On   | 
Off  | 
0 | |
| 
7 | 
At VGA mode sync failure. | 
Change to TV mode | 
Keep VGA mode | 
1 | |
| 
Byte 2 | 
6 | 
Reaction time of remote commands. | 
Fast  | 
Slow  | 
0 | 
| 
7 | 
WSS [Wide Screen Signaling Bits]  | 
Evaluated  | 
Not evaluated | 
0 | |
| 
Byte 3 | 
0 | 
Picture ratio. | 
Evaluated  | 
Blocked  | 
0 | 
| 
2 | 
Analogue EPG night update. | 
Off  | 
On  | 
1 | |
| 
4 | 
Switching off after channel closes. | 
Yes  | 
No  | 
0 | |
| 
5 | 
Factory mode | 
Off  | 
On  | 
0 | |
| 
Byte 4 | 
2 | 
Power down cycle. | 
Yes  | 
No  | 
0 | 
| 
4 | 
SMD switch over. | 
Fast  | 
Slow  | 
1 | |
| 
5 | 
Warm up mode | 
On  | 
Off  | 
1 | |
| 
Byte 5 | 
2 | 
PIP within EPG | 
Last program | 
Selected program ‘now’ | 
0 | 
| 
3 | 
Sound AURO | 
SPDIF – out TV | 
Analogue sound from SCART 2 | 
0 | |
| 
Byte 6 | 
6 | 
Indication of movie mode | 
No  | 
Yes (with color of Side Panels) | 
0 | 
| 
7 | 
VT sub pages mode | 
Normal  | 
Off  | 
0 | |
| 
Byte 7 | 
4 | 
Accessing the 16:9 switching voltage | 
Yes  | 
No  | 
0 | 
| 
Byte 8 | 
0 | 
Factory mode | 
No  | 
Yes  | 
0 | 
| 
7 | 
Auto on [warm up] | 
Off  | 
On  | 
0 | |
| 
Byte 9 | 
0 | 
Chroma output at SCAT-1 | 
Pin 7 | 
Pin 15 | 
0 | 
| 
1 | 
Ext. receiver in VT mode | 
Autom. Channel recognition | 
No autom. recognition | 
0 | |
| 
4 | 
DISqC telegramm | 
Also for not used switch. | 
Only for not used switch | 
0 | |
| 
7 | 
Rotation control | 
No  | 
Yes  | 
1 | |
| 
Byte 10 | 
0 | 
Signal peaks | 
Yes  | 
No  | 
0 | 
| 
1 | 
Program change in overview | 
Possible  | 
Not possible | 
0 | |
| 
4 | 
Correction of MSP registers. | 
No  | 
Yes [sound problem Luxembourg] | 
0 | 
 
