
SAMSUNG LED
Model: UE49KU6670 UE49KU6670U
Panel: CY-VK049HGLV4V
LED backlight: S_6KU6.4-6.5K_49_SFL70 L / R58_REV1.1 160119 LM41-00247A
LED driver (backlight): integrated into PSU
Power Supply (PSU): BN44-00876A L55E6_KHS
MainBoard: BN41-02528A N94-11055C
IC MainBoard: SDP1531, 25Q40, 25Q80, 24C512, K4F8E304H, K4F2E3S4H
Tuner: BN40-00322A
Control: Remote: BN59-01242A RMCSPK1AP1, IR: BN41-02515A, Wi-Fi: BN59-01239A WCK730B
Technical Specifications UE49KU6670U
SAMSUNG UE49KU6670
General repair guidelines for TV LCD LED
Possible malfunctions
- The SAMSUNG UE49KU6670 TV does not turn on and does not show any signs of operability at all. There is no reaction to the remote control and control buttons from the front panel.
Most often, with such manifestations, the main power module BN44-00876A is found to be faulty. It is necessary to measure its output voltages, and in case of their absence, check the operability of the power switches of the converters and rectifier diodes for the probability of a short circuit.
In case of breakdowns in the secondary circuits, the converter can operate in a short circuit mode, and during a short circuit in the elements of the primary circuit, the mains fuse usually breaks.
Breakdown of power switches (MosFet) in pulsed sources is sometimes caused by malfunctions of other circuit elements, for example, in circuits supplying a PWM controller, frequency-setting or damper ones, as well as in negative feedback circuits (OOS) of stabilization. PWM controllers (PWM), if they do not have visible damage to the chassis and open short circuit between the terminals, are usually checked by replacement.
- There is no image, there is sound, it responds to the remote control, the channels are switched. In some cases, the image appears when you turn on and immediately disappears.
Usually in such cases, a malfunction is detected in the backlight nodes of the LED panel. The reason can be both in the power of the LEDs, in their serviceability (breakdown or breakage), as well as in the violation of the contact connections of the LED strips.
To check the LED lines for breaks without disassembling the panel, for example, a current source will help. It is impossible to open series-connected PN junctions with a simple multimeter, a voltage of the order of several tens of volts is required.
- The indicator blinks or lights constantly, the TV does not turn on, does not respond to the remote control.
Repair or diagnostics of the BN41-02528A motherboard should begin by checking the stabilizers and power converters needed to power the chips and matrix. If necessary, update or replace the software (software). Sophisticated MB board repair (SSB) is in some cases possible and practiced by repairmen. To do this, check and, if necessary, replace the elements SDP1531, 25Q40, 25Q80, 24C512, K4F8E304H, K4F2E3S4H. BGA chip malfunctions are usually easy to detect by warming up.
In the absence of tuning to the channels of on-air or cable television, you should make sure that the software is correct, as well as in accordance with the ratings of the supply voltages at the terminals of the tuner BN40-00322A. It is also necessary to check the presence of pulses of data exchange between the tuner and the processor via the I2C bus using an oscilloscope.
Attention to users! Self-repair of a SAMSUNG UE49KU6670 TV without the appropriate qualifications and the necessary experience can lead to its complete non-repairability!
The appearance of the MainBoard BN41-02528A is shown in the figure below:
BN41-02528A
BN41-02528A can be used in TVs:
SAMSUNG UE43KU6650U (Panel CY-VK043HGAV5V), SAMSUNG UE43KU6000W UE43KU6000 (Panel CY-GK043HGEV1H), SAMSUNG UE55KU6400 UE55KU6400U (Panel CY-KK055HQLV4H), SAMSUNG UE49KU6670 UE49KU6670U (Panel CY-VK049HGLV4V), SAMSUNG UE40KU6000U (Panel LSF400FN05-L03 CY-GK040HGLV4V), SAMSUNG UE40KU6300U (Panel CY-WK040HGLV1V), SAMSUNG UE43KU6500U (Panel CY-VK043HGAV4V T430QVR01.0), SAMSUNG UE40KU6402U (Panel CY-KK040HGNV4H).
The appearance of the power supply
Main features of the SAMSUNG UE49KU6670 device:
Installed matrix (LED panel) CY-VK049HGLV4V.
To power the backlight LEDs, a converter is used, combined with a power supply.
The formation of the necessary supply voltages for all nodes of the SAMSUNG UE49KU6670 TV is carried out by the BN44-00876A power module, or its analogues.
MainBoard - the main board (motherboard) is a BN41-02528A module, using microchips SDP1531, 25Q40, 25Q80, 24C512, K4F8E304H, K4F2E3S4H and others.
The tuner BN40-00322A provides the reception of television programs and tuning to channels.