Technical description and composition of the LG 43UJ675V TV, panel type and modules used. The composition of the modules.LG LED
Model: 43UJ675V
Chassis / Version: LJ7 Chassis
Panel: LC430DGG (FK) (M4)
LED backlight: HC430DGN-ABSR2-211X
T-CON: HV430 550QUB-N4D 47-6021117
LED driver (backlight): integrated into PSU
Power Supply (PSU): EAX67267601 LGP43D-17U2
MainBoard: EAX67133404 (1.0)
IC MainBoard: Realtek K3Lp, FT24C256A, DTA2010M
Tuner: TDJN-G501D
Specifications 43UJ675V
LG 43UJ675V
General recommendations for TV LCD LED repair
Possible manifestations of malfunctions
- LG 43UJ675V does not turn on, does not respond to buttons and remote control, indicators on the front panel do not light or flash.
Most likely in this case, the main switching power supply (SMPS) LGP43D-17U2 is faulty. It is necessary to measure its output supply voltages, and in their absence, check the serviceability of the power switches of the converters and rectifier diodes for the probability of breakdown in semiconductor PN junctions.
In case of any breakdowns in the secondary circuits, the converter can operate in an emergency mode of a short circuit, and with a short circuit in the power elements of the primary circuit, the mains fuse or the current sensor at the source of the key often breaks off.
Breakdown of Mos-Fet switches used in switching power supplies is often caused by malfunctions of other elements, for example, in the power supply circuit of the PWM regulator, in frequency setting or damper circuits, as well as in negative feedback stabilization. PWM microcircuits (PWM) are usually checked by replacing them with new ones, or knowingly working.
- There is no picture, but there is sound and reaction to the remote control. Or, for a second, the image may appear immediately after switching on.
A malfunction is usually in these cases most likely in the backlight units of the display matrix. The reason for this may be an open circuit in the LED circuit, or a problem in stabilizing their power supply.
When trying to detect a break in the LED lines, it should be borne in mind that it is difficult to do this without disassembling the panel. For example, a current source is needed to open PN junctions connected in series.
- The TV does not turn on, does not respond to the remote control. The indicator blinks or signals the standby mode.
Repair or diagnostics of the EAX67133404 motherboard should begin with checking the stabilizers and power converters required to power the microcircuits and matrix. If necessary, you should update or replace the software (software). Complicated repair of MB (SSB) board is in some cases possible and practiced by repairmen. To do this, check and, if necessary, replace the Realtek K3Lp, FT24C256A, DTA2010M elements. BGA chip faults are usually easy to detect by warm-up.
If there is no reception of TV channels, but the TV is working properly from external devices, first of all, you need to check the supply voltage of the TDJN-G501D tuner and update the software. I2C communication pulses must be monitored with an oscilloscope.
If LG 43UJ675V has no picture, but there is sound, often the LCD backlight LC430DGG (FK) (M4) simply does not work. Moreover, in LED TVs, the LEDs inside the panel usually fail, less often the LED driver.
In such cases, you can see a barely noticeable image with a successful hit of external light on the screen.
Replacing the LEDs requires disassembling the LC430DGG LCD panel, a process that requires experience and qualifications from the technician. We do not recommend doing such work on your own to the owners of TVs and craftsmen who do not have experience in repairing LCD panels
If there is no image, and the backlight is on, the screen becomes slightly lighter when turned on, and in an open TV you can see the light through the holes in the panel case.
In this case, the panel may also be faulty - damage to the strips, loops, for example, as a result of moisture ingress after unsuccessful washing of the screen, the T-CON (Timing Controller) board may be faulty. But often the main board MainBoard EAX67133404 turns out to be faulty, a software failure is also possible.
Then, first of all, it is necessary to check the panel supply voltage, the fuses on the T-CON board, as well as the supply and reference voltages of the column and line drivers - VGH, VGL, Vcom.
If these measurements are within the normal range, it is necessary to trace the passage of LVDS signals from MainBoard EAX67133404 with an oscilloscope, as well as synchronizing signals to the loops with drivers.
Flooded or unsuccessfully washed screens of LED TVs can be restored, in about half of the cases, usually if significant damage has not formed in the loops and panel strips.
loops
Attention to TV owners! Attempts to repair LG 43UJ675V by yourself are not recommended by the manufacturer and can lead to serious negative consequences!
DOWNLOAD SCHEMATIC DIAGRAM / SERVICE MANUAL ------------------> CHASSIS : UD74P в архиве (10.1 Мб for models 43UJ67*V, 43UJ67*V-ZD, 43UJ67*V-ZC, 43UJ655V 43UJ655V-ZC, 43UJ701V 43UJ701V-ZC, 43UJ670V, 43UJ675V
Additional MainBoard RepairThe appearance of the MainBoard EAX67133404 is shown in the figure below:
EAX67133404
External view of the power supply
Main features of the LG 43UJ675V device:
Installed matrix (LED panel) LC430DGG (FK) (M4).
Matrix control uses the HV430 Timing Controller (T-CON).
A converter combined with a power supply is used to power the backlight LEDs.
The formation of the necessary supply voltages for all nodes of the LG 43UJ675V TV is carried out by the EAX67267601 power module, or its analogs.
MainBoard - the main board (motherboard) is an EAX67133404 module, using Realtek K3Lp, FT24C256A, DTA2010M and others.
Tuner TDJN-G501D provides reception of television programs and tuning to channels.
There are files to download for the 43UJ675V model from the manufacturer:
Files with updates and instructions:
File Description File Name Type Date Size
SW File (Version 05.80.50). Update instructions TV_Software_Update_Guide_v3.pdf PDF 01/22/2020 2014K
SW File (Version 05.80.50). Firmware (USB) Software_File (Version_05.80.50) .zip ZIP 01/22/2020 831673K
Compatible with 43UJ620V-ZA, 43UJ6307-ZA, 43UJ6309-ZA, 43UJ630V-ZA, 43UJ631V-ZA, 43UJ634V-ZD, 43UJ635V-ZF, 43UJ639V-ZE, 43UJ6517-ZA, 43UJ6519-ZA, 43UJ651V-ZA, 43UJ655V-ZC, 43UJ670V-ZD, 43UJ675V-ZC, 43UJ701V-ZC, 49UJ620V-ZA, 49UJ6307-ZA, 49UJ6309-ZA, 49UJ630V-ZA, 49UJ631V-ZA, 49UJ634V-ZD, 49UJ635V-ZF, 49UJ639V-ZE, 49UJ6517-ZA, 49UJ6519-ZA, 49UJ651V-ZA, 49UJ655V-ZC, 49UJ670V-ZD, 49UJ675V-ZC, 49UJ701V-ZC, 55UJ620V-ZA, 55UJ6307-ZA, 55UJ6309-ZA, 55UJ630V-ZA, 55UJ634V-ZD, 55UJ635V-ZF, 55UJ6517-ZA, 55UJ6519-ZA, 55UJ651V-ZA, 55UJ655V-ZC, 55UJ670V-ZD, 55UJ675V-ZC, 55UJ701V-ZC, 55UK6100PLA, 55UK6100PLB, 60UJ6307-ZA, 60UJ6309-ZA, 60UJ630V-ZA, 60UJ634V-ZD, 60UJ6517-ZA, 60UJ6519-ZA, 60UJ651V-ZA, 65UJ620V-ZA, 65UJ6307-ZA, 65UJ6309-ZA, 65UJ630V-ZA, 65UJ634V-ZD, 65UJ6517-ZA, 65UJ6519-ZA, 65UJ651V-ZA, 65UJ655V-ZC, 65UJ670V-ZD, 65UJ675V-ZC, 65UJ701V-ZC, 65UK6100PLA, 65UK6100PLB, 70UJ675V-ZA, 75UJ651V-ZB, 75UJ675V-ZA.
User Manuals and Instructions:
File type File name Language Date Size
User manual 43,49,55,65UJ67_UJ634_ (RU) .pdf Russian 22.06.2017 16762K
Quick Start Guide w3.5_mr_e05_c.zip English, Estonian, Latvian, Lettish, Lithuanian, Russian 10/31/2019
Instructions for quick setup Web_OS_3.5_Smart_QSG_RUS.pdf Russian 13.09.2017 4888K
Files can be downloaded from the manufacturer's website for the 43UJ675V model.
LG 43UJ675V TV with LCD LC430DGG-FKM4, 42.5 "(108 cm) diagonal 16: 9 format. The LCD panel implements the principle of direct display backlighting with rear-mounted LEDs - Direct LED.
The LC430DGG-FKM4 sensor and MainBoard EAX67133404 software are capable of realizing the highest UHD image quality at 3840x2160 resolution in 4K UHD, HDR. Image processing is performed using modern High Dynamic Range (HDR) technology with an extended range of brightness gradations.
The 43UJ675V TV model has SMART firmware and webOS operating system installed. The connection to the network can be carried out via Wi-Fi wireless connection. Supported media file formats: MP3, WMA, MPEG4, HEVC (H.265), DivX, MKV, JPEG.
Speaker sound system power 20 W (2x10 W) is provided by two speakers. The NICAM stereo audio processing system and the Sound Surround function are used.
Communication with other devices via an external interface is supported by standard input and output connectors: antenna input (RF), AV, component, HDMI x4, USB x2, Ethernet (RJ-45), Bluetooth, Wi-Fi 802.11ac, WiDi, Miracast. A headphone jack is provided.
The digital tuner can receive TV channels in the DVB-T MPEG4, DVB-C, DVB-T2, DVB-S2 standards.
The TV uses an EAX67267601 power supply.
Dimensions: with stand 974x630x235 mm, without stand 974x571x79 mm.
TV weight: with stand: 10.5 kg, without stand: 9.2 kg.
Attention! The LC430DGG-FKM4 panel of the LG 43UJ675V LED TV is an expensive and unreliable element.
Do not allow any impact on the glass and pressure on the screen surface to avoid damage to the LED panel!
It is also unsafe for liquid to spill onto the screen. Sometimes one drop is enough if it drips down the glass onto the cables to make the TV unrepairable.
